Cable Connection And Shield Support - Siemens SINAMICS S120 Manual

Hide thumbs Also See for SINAMICS S120:

Table of Contents

11.5 DC link adapter

Cable connection and shield support

In order to simplify installing the DC link connecting cables at the DC link adapter, first fix the

cables to the control cabinet panel (see above).

Required tools:

● Size 6 Allen key to attach the cables

● Suitable tool for hose clamps, e.g. flat-bladed screwdriver

Table 11- 24 Connecting the DC link connecting cables to the DC link adapter

1. Fix the first conductor of the DC link connecting

cable to the profile rail using a cable clamp.

3. Slide the cable clamp onto the tongue, and

then insert the end of the cable into the DCN

connection of the DC link adapter.

2. Route the cable end through an appropriate

cable clamp.

4. Tighten the cable using an Allen key.

Manual, (GH2), 07/2016, 6SL3097-4AC00-0BP8

Booksize Power Units

Show Quick Links

Table of Contents