Reinforced Dc Link Busbars; Description - Siemens SINAMICS S120 Manual

Hide thumbs Also See for SINAMICS S120:

Table of Contents

11.3 Reinforced DC link busbars

Reinforced DC link busbars

Reinforced DC-link busbars are available for 50 mm and 100 mm wide components of the

Booksize and Booksize Compact series. They are used to increase the current carrying

capacity of the components used to conduct the DC-link current from 100 A to 150 A.

Table 11- 11 Reinforced DC-link busbars

Reinforced DC link busbar for

50 mm wide components

Article number: 6SL3162-2DB00-

• The busbar must always be mounted with the longer narrow edge on the left (see above).

• Reinforced DC link busbars must not be installed at the left-hand module in the drive line-

DC-link rectifier adapter / DC-link adapter

Note the following when using reinforced DC link busbars:

• It is not possible to use a DC link rectifier adapter!

• Use the 2-hole adapter as DC link adapter (Article number: 6SL3162-2BM10-0AA0).

Notes on configuration and arrangement of the components in the drive line-up can be found

in the Chapter, Arrangement of components and devices (Page 671).

Reinforced DC link busbar for 100 mm wide components

Article number: 6SL3162-2DD00-0AA.

Manual, (GH2), 07/2016, 6SL3097-4AC00-0BP8

Booksize Power Units

Show Quick Links

Table of Contents