Electrical Connection; Preparing The Cables - Siemens SINAMICS S120 Manual

Accessories
11.5 DC link adapter
11.5.6

Electrical connection

11.5.6.1

Preparing the cables

1. Prepare the DC link connecting cables as shown below.
2. Only use shielded cables with insulated end sleeves.
①
②
Figure 11-29 Single-core and two-core DC link connecting cable with insulated end sleeves, all
Refer to the table below for dimension A:
648
Protective braided shield folded back and fixed using shrink-on sleeve
Insulated end sleeve
dimensions in mm and (inch)
Conductor cross-
section [mm ]
2
50 / 70 / 95
Mounting location of the DC link
adapter at the drive line-up
Left
Right
Connection
DCP
DCN
DCP
DCN
Booksize Power Units
Manual, (GH2), 07/2016, 6SL3097-4AC00-0BP8
A [mm]
70
60
60
70