Mounting - Siemens SINAMICS S120 Manual

Hide thumbs Also See for SINAMICS S120:

Table of Contents

Motor Modules Booksize

6.4 Motor Modules with cold plate

Mounting

Please note the following before mounting a Motor Module with cold plate on a customer-

specific heat sink:

● Check the surface of the heat sink to ensure that it is not damaged.

● To improve heat transfer, a heat-conducting medium must be used. Special spherical-

indented heat-conducting foil must be used for this purpose. Every component with cold

plate is supplied with heat-conducting foil cut to the right size. Note the mounting position

of the heat-conducting foil (see diagram below).

• Also replace the heat-conducting foil when replacing a component.

• Only use heat-conducting foil released or supplied by Siemens.

Heat-conducting foil, 50 mm

Heat-conducting foil, 100 mm

Heat-conducting foil, 150 mm

Heat-conducting foil, 200 mm

Heat-conducting foil, 300 mm

To mount the components, M6 threaded bolts and hexagon nuts/grub screws ISO 7436-

M6x40-14 H, property class 8.8 are recommended.

Overview of heat-conducting foils

6SL3162-6FB00-0AA0

6SL3162-6FD00-0AA0

6SL3162-6FF00-0AA0

6SL3162-6FH00-0AA0

6SL3162-6FM00-0AA0

Manual, (GH2), 07/2016, 6SL3097-4AC00-0BP8

Booksize Power Units

Show Quick Links

Table of Contents