Technical Specifications; Drive-Cliq Cabinet Bushings; Description - Siemens SINAMICS S120 Manual

Accessories

11.6 DRIVE-CLiQ cabinet bushings

11.5.7

Technical specifications

Table 11- 25 Technical data DC link adapter
6SL3162-
Current-carrying capacity
– attached using 2 screws
– attached using 4 screws
Connection cross-section
Stripped length
Tightening torque
– terminals
– DC link busbars
Weight
11.6 DRIVE-CLiQ cabinet bushings
11.6.1

Description

A DRIVE-CLiQ cabinet bushing is used to connect the DRIVE-CLiQ cables between the
inside and outside of the control cabinet. It is used in a control cabinet panel. The data lines
and the voltage supply contacts of the DRIVE-CLiQ are also routed through the bushing. The
DRIVE-CLiQ cabinet bushing for DRIVE-CLiQ cables is available with DRIVE-CLiQ
connector and M12 connector/socket.
DRIVE-CLiQ cabinet bushing for DRIVE-CLiQ connectors
The cabinet bushing has degree of protection IP54 according to IEC 60529 from the outside
towards the inside. Inside the control cabinet, a connection is established according to
degree of protection IP20 or IPXXB acc. to IEC 60529. So that the complete outside of the
cabinet bushing, including the DRIVE-CLiQ interface, has degree of protection IP54, a
DRIVE-CLiQ cable must be used, which as a minimum must also have degree of protection
IP54.
DRIVE-CLiQ cabinet bushing for M12 connector/socket
The cabinet bushing has degree of protection IP67 according to IEC 60529 from the outside
towards the inside. Inside the cabinet a connection according to degree of protection IP67 in
compliance with IEC 60529 is realized.
652
Unit 2BM01-0AA0
A 150
A 240
mm² 35 ... 95
mm 27
Nm 13
Nm 1.8
kg 0.34
Manual, (GH2), 07/2016, 6SL3097-4AC00-0BP8
2BM10-0AA0
150
---
35 ... 95
27
13
1.8
0.33
Booksize Power Units