Siemens SINAMICS S120 Manual page 589

Table 10- 14 Installation steps
Cable glands Cable
VS1 K1
VS2 K2
K1
K2
K2
K1
K2
3 separate cable ends for cables K1 and K2 are connected later.
VS3 K3
VS4 K4
K3
K4
K3
K4
K4
K1
K3
K2
K4
K3
K1
Booksize Power Units
Manual, (GH2), 07/2016, 6SL3097-4AC00-0BP8
Conduc- Installation step
tor/Phase
L , L , L , PE Introduce the cable with all the conductors and shield, tighten the gland and
1 2 3
lay conductors L
L , L , L , PE Introduce the cable with all the conductors and shield, tighten the gland and
1 2 3
lay conductors L
L (blue) Lay L on V1 and screw these together.
2 2
L (blue) Lay L on V1 and screw these together.
2 2
PE Lay PE on PE1 and screw these together.
(green/yellow)
L (brown) Lay L on W2 and screw these together.
3 3
L (black) Lay L on U2 and screw these together.
1 1
L , L , L , PE Introduce the cable with all the conductors and shield, tighten the gland and
1 2 3
lay conductors L
L , L , L , PE Introduce the cable with all the conductors and shield, tighten the gland and
1 2 3
lay conductors L
L (blue) Lay L on V2 and screw these together.
2 2
L (blue) Lay L on V2 and screw these together.
2 2
L (brown) Lay L on W3 and screw these together.
3 3
PE Lay PE on PE4 and screw these together.
(green/yellow)
L (black) Lay L on U3 and screw these together.
1 1
L (black) Lay L on U4 and screw these together.
1 1
L (black) Lay L on U1 and screw these together.
1 1
L (brown) Lay L on W4 and screw these together.
3 3
L (brown) Lay L3 on W1 and screw these together.
3
PE Lay PE on PE3 and screw these together.
(green/yellow)
PE Lay PE on PE2 and screw these together.
(green/yellow)
10.2 Voltage Protection Module VPM
(black) and PE (green/yellow) on top of the other conductors.
1
(black) and PE (green/yellow) on top of the other conductors.
1
(black) and PE (green/yellow) on top of the other conductors.
1
(black) and PE (green/yellow) on top of the other conductors.
1
Motor-side power components
589