Table of Contents
Advertisement
Installation
Install Liners
Unpack the liners carefully as they are fragile. The steel
platform around the burner should not yet be installed.
Ceramic panels
1. Identify the top and bottom (fi re) sides of the top
panel, then slide it between the top panel support
brackets.
Overhanging part sits on top
of side panel at each end
Top panel orientation
2. Lift the top panel slightly at one end of the fi rebox
and place one side panel against the end wall and
side of the fi rebox ensuring it is well seated against
the fi rebox side.
34
Top
Underside, fi re side
3. Let the top panel protruding part rest on the cut out
of the upper part of the side panel.
4. Repeat with the other side panel.
Glass panels
1. Install the top panel, sliding it between the top panel
support brackets.
2. Fit the anchor brackets onto the side panels.
Front of panel, fi re side
3. Place one side glass panel and anchor against the
side wall of the fi rebox, smooth side showing.
4. Add the other side glass
panel and anchor; place
the other end of the
top panel on its anchor
bracket.
Liners
Top panel rests on
anchor brackets
Top panel
Anchor
bracket
Glass panel
Advertisement
Table of Contents
