Rock Set And Liners 530Rsk - Valor PORTRAIT 530IN Installation Manual

Installation

Rock Set and Liners 530RSK

Unpack each piece of the ceramic rock set carefully to
avoid damages. The set contains:
• Ceramic platform
• Left and right side reversible ceramic panels
• Rear panel support
• Rear fl uted panel
• Ceramic base for rocks
• 12 ceramic rocks
580RGL Reflective Glass Liner Set. To install the
580RGL, see the installation instructions provided with
the kit.
Install liners
1. Remove the rear
panel support inside
the fi rebox (3 screws).
2. Replace with the rear
panel support provid-
ed with the 530RSK kit
and fi x it (3 screws).
If installing the
567FGP Top Grille
(sold separately), fi t it
now. See instructions
supplied with the
grille.
3. Place the rear panel
on the rear support
as indicated. Hold in
place and go to next
step.
4. Place the left and then the right panels in the fi rebox
showing the black fl uted sides.
28
Install rock base & platform
1. Place the rock base behind the burner. The two
protrusions in front of the base should rest on the
burner mounts as indicated.
Burner
ROCK
BASE
Rest the rock base
behind the burner
on its bracket flanges
2. Place the ceramic platform over the burner and
around the rock base with the pegs on the top. The
rear part of the platform should overlap the edges
of the rock base on each side.
Fuel Beds
Back Panel
Rock base
support
Burner
bracket
SIDE VIEW
Front edge of platform rests on top of
sheet metal lip