Configuring RADIUS on a Server
To use RADIUS with PortServer II, you must have at least one RADIUS server on
your network. You can download the RADIUS server binary code from Digi Interna-
tional's FTP server, if you do not already have it installed.
Note: The Digi International FTP server includes the following RADIUS server
binaries: Linux, SCO Unix, Solaris, Unixware SVR4, Windows NT, BSD,
and Free BSD.
To download the FTP server binary:
1. Connect to the Digi International FTP server ftp.dgii.com.
2. Change directory to drivers/portserv/radius.
3. Identify the /bin directory containing the binary for your server (for example,
/bin/sco contains the binary for SCO Unix server) and download the file.
4. Install the binary following the instructions contained in the associated README
file.
Page 178
Configuring RADIUS
90030500B