Dialer Messages - Digi PortServer II User Manual

26) WAN couldn't disconnect interface to data stream
*Internal error*
27) connect mgr received an illegal msg
*Internal error*
28) unable to open port <port> for frame relay
PortServer II could not set the port for Frame Relay because the port appeared to be
busy.
29) port <port> for frame relay: I_LINK fails
*Internal error*
30) could not open wan driver
*Internal error*
31) memory not available for constructing filter
PortServer II does not have sufficient memory available for the required filter.
32) setting wan driver startup failed
*Internal error*

Dialer messages

(Option=dialer)
1) transferred to unknown state: <number>
A script tried to transfer to a stanza that is not defined in the script.
2) command depth overflow, state: <number>
Too many recursive state executions were attempted.
3) error in script: <scriptno> state <stanza> field <string>
Check the script for syntax errors.
Page 222 Troubleshooting 90030500B