Ppp Messages - Digi PortServer II User Manual

10) Radius: Login host missing, access denied.
The RADIUS server told PortServer II to log the user into a host automatically, but
did not specify the host.
11) Radius: Need port for raw TCP service.
The RADIUS server told PortServer II to connect the user by a raw TCP connection,
but did not specify the host.
12) Radius: Ippool can only be used with 255.255.255.255 netmask
The RADIUS server told PortServer II to give the user an IP address from the IP pool,
but gave a netmask value that was not 255.255.255.255.
13) Radius: Must have service type; access denied
The RADIUS server returned an invalid packet. This indicates a problem with the
RADIUS server, as the RADIUS specifications require a Service-Type to be present.
14) Radius: filter <name> not found, access denied
A filter specified by the RADIUS server to use is not defined in the Filter Table.
Access is denied because this could lead to a security breach.
15) Request Denied <number>
The RADIUS server denied access
16) socket failed
*Internal error*
17) bind failed
*Internal error*
18) send malloc failed, recv malloc failed
Out of memory

PPP Messages

(Option=ppp)
1) (<port>) Bad LCP_CFG packet
*Internal error*
90030500B Troubleshooting Page 231