Removing A User; Changing A User's Name - Digi PortServer II User Manual

When the user selects a command line and presses Enter, the command speci-
fied on that line is executed.
Note: You can include blank lines in a menu.
3. Configure a user to the menu. For example:
set user name=fred menu=1 DefaultAccess=menu

Removing a user

To remove a user's login and associated information from PortServer II, enter the fol-
lowing command:
set user rmuser=<user_name>
For example, to remove the user called Peter, enter:
set user rmuser=Peter
You can also remove several users by specifying a range of index numbers:
set user rmuser=on range=<range>
You can identify the range of index numbers to use from the User Table. To view the
User Table, enter set user with no options.
For detailed information, refer to set user in the Command Reference Guide.

Changing a user's name

To change a user's name without affecting other definitions such as the password,
enter the following command:
set user newname=<newusername> name=<oldusername>
For example, to change Peter to Linda, enter:
set user newname=Linda name=Peter
For detailed information, refer to set user in the Command Reference Guide.
90030500B Basic Configuration Page 79