Forwarder Messages; Routed Messages - Digi PortServer II User Manual

16) packet discarded to interface <name>: fragmentation data error
The packet to be fragmented was in error, so the packet was discarded.

Forwarder Messages

(Option=fwdr)
1) packet discarded on interface <name>: <reason>
The reason(s) for discarding the packet are detailed in associated Trace IP messages.

Routed Messages

(Option=routed)
1) adding dependency route for <index> (<IP address>) failed: out of memory
The static route identified by <index> could not be added to the Route Table due to a
memory allocation failure.
2) adding dependency route for <index> (<IP address>) failed: invalid gateway
The static route identified by <index> could not be added to the Route Table because
the gateway is unknown or invalid.
3) adding dependency route for <index> (<IP address>) failed: invalid metric
The static route identified by <index> could not be added to the Route Table because
the metric was not 1 for a direct host address, greater than 3 for a direct net address, or
0 for an indirect address.
4) adding dependency route for <index> (<IP address>) failed: invalid address
The static route identified by <index> could not be added to the Route Table because
the address is the same as the Ethernet's IP address.
5) adding dependency route for <index> (<IP address>) failed: invalid mask
The static route identified by <index> could not be added to the Route Table because
the mask equals 0.
6) adding dependency route for <index> (<IP address>) failed: invalid interface name
The static route identified by <index> could not be added to the Route Table because
the interface (WAN) name is unknown or invalid.
Page 226 Troubleshooting 90030500B