Arp Messages; Serial Messages - Digi PortServer II User Manual

ARP messages:

(Option=ARP)
1) RARP response conflict from <IP address1>: answered <IP address2>
An unexpected or late RARP response was received from <IP address1> which con-
flicted with the IP address of PortServer II.
2) received request with invalid address <IP address>
An ARP request was received with an invalid sender IP address.
3) <IP address> entry conflict
An ARP packet caused an conflict in the ARP table. The new <IP address> entry has
replaced the old IP address.
4) another unit using our address <IP address>
An ARP packet arrived from a unit using the IP address of the PortServer II.
5) gratuitous ARP found IP address conflict <IP address>
Gratuitous ARP detected another box using the IP address of the PortServer II.
6) closed
*Internal error*

Serial messages

(Option=Serial)
1) Alloc error : Frames free list empty
*Internal error*
2) allocb failure, invoking flow control for port <port number>
Allocation of memory for port buffers failed.
3) recovered from allocb failure
Allocation of memory for port buffers had failed, but subsequently recovered.
4) ran out of transmit buffers
*Internal error*
Page 212 Troubleshooting 90030500B