Table of Contents
Advertisement
Configure the Connect IT Mini
Field
Contact
Location
Description
Banner
5. Click Save at the bottom of the screen to save the changes.
Configure a VPN
Configure an IPsec tunnel for a VPN
You can configure an IPsec tunnel for a VPN.
1.
Log in
to manage the Connect IT.
2.
Access the Configuration > VPN
3. Expand the IPsec section.
4. Set the NAT keep alive time.
a. Expand the advanced section.
b. In the NAT keep alive time field, enter the length of time to keep NAT alive for
5. Create an IPsec tunnel.
a. Expand the Tunnels section.
b. In the Add IPsec tunnel field, enter a name for the tunnel.
c. Click Add.
d. The tunnel is enabled by default. Verify that the Enable option is selected.
e. Complete the fields in each of the sections. To display information about what you
6. Click Save or Apply.
Configure an OpenVPN server
You can configure an OpenVPN server and define clients. To display information about what you should
enter in each field, hover over the field name or click the down arrow and then Help next to each field.
1.
Log in
to manage the Connect IT.
2.
Access the Configuration > VPN
Digi Connect IT® Mini User Guide
Description
Contact information for this Connect IT. This is for reference only.
A description of the Connect IT's physical location. This is for
reference only.
A description of the Connect IT. This is for reference only.
A banner message that displays when a user accesses terminal
services on this device. This is for reference only.
screen.
IPSEC tunnels. the default is 40 seconds. The syntax for the entry is number
{w|d|h|m|s}.
should enter in each field, hover over the field name or click the down arrow and
then Help next to each field.
screen.
Configure a VPN
37
Advertisement
Table of Contents
Need help?
Do you have a question about the Connect IT Mini and is the answer not in the manual?