Pushbuttons - Digi PortServer II User Manual

Pushbuttons

There are two pushbuttons, one marked with a left arrow and one with a right arrow.
You can use these to:
• Select a serial port to monitor. If you press the left arrow, the number on the
alphanumeric display decrements and information for that serial port is shown on
the LED indicators. Similarly, if you press the right arrow, the number on the
alphanumeric display increments and information for that serial port is shown on
the LED indicators.
• Select diagnostic tests, as described in Chapter 17, Troubleshooting.
• Reset PortServer II to factory default settings, as described in Chapter 17,
Troubleshooting.
90030500B Operation Page 21