Ip Messages - Digi PortServer II User Manual

2) LMI status change: deleting PVC <DLCI>
The DCE has informed PortServer II that the <DLCI> is no longer valid.
3) IE processing error: invalid buffering
*Internal error*
4) IE processing error: length mismatch
*Internal error*
5) PCB <dlci> is not up
While attempting to send data to this <DLCI>, PortServer II has detected that it is not
in service.
6) LCB is not up
While attempting to send data on this LMI, PortServer II has detected that it is not in
service.

IP messages

(Option=ip)
1) packet discarded from interface <name>: invalid buffering
*Internal error*
2) packet discarded from interface <name>: couldn't remove padding
*Internal error*
3) packet discarded from interface <name>: invalid source address
An IP packet with invalid source address was received.
4) packet discarded from interface <name>: unable to forward to UDP user <port>
UDP user <port> was congested and PortServer II dropped a packet.
5) couldn't add to route table (out of memory)
An attempt to add a route to the Route Table failed due to a memory allocation failure.
6) couldn't add to route table (invalid gateway)
An attempt to add a route to the Route Table failed because the gateway is unknown
Page 214 Troubleshooting 90030500B