Users Logging On To Portserver Ii - Digi PortServer II User Manual

Users logging on to PortServer II

When you have configured a user, he or she can log in to PortServer II (if permitted).
Alternatively, PortServer II may route the login request to any autoconnect host that
you have defined. To log in, the user enters a command in the format:
login (options)
To use the default access login type, the user enters a command similar to the follow-
ing example:
login:steve
To access an autoconnect host, the user enters a command similar to the following
example:
login:steve autoconnect
The autoconnect option can only be used if you have set AutoConnect=on or
DefaultAccess=AutoConnect for the user.
To access the PortServer II command line, the user enters a command similar to the
following example:
login:steve CommandLine
The CommandLine option can only be used if you have set CommandLine=on or
DefaultAccess=CommandLine for the user.
To display the login menu (if configured), the user enters a command similar to the
following example:
login:steve Menu
To access the configured network service, the user enters a command similar to the
following example:
login:steve netservice
Note: The autoconnect, CommandLine, Menu, and netservice options
can be abbreviated, provided sufficient unique characters are typed to allow
PortServer II to identify the command.
Note: The login command is also passed to the RADIUS server, if one is available.
Page 80 Basic Configuration 90030500B