Table of Contents
Advertisement
A
Appendix A Manual instrument operation
Administrate the instrument from the touchscreen
Define the system
shortcuts
Review the
instrument
statistics
94
4. Set the Internet Protocol (TCP/IP) Properties for either DHCP or Static IP
communication.
Network service
DHCP
Static IP
5. Tap
Save to save the settings, then tap OK when prompted.
6. Tap
to return to the main menu.
You can use the QuantStudio
buttons that appear in the Main Menu. You can configure shortcuts to automatically
open specific files and folders so that you can access data quickly and easily without
having to navigate to it.
1. If the instrument is in standby, touch the QuantStudio
touchscreen to activate it, then press
2. In the Main Menu, configure the shortcuts as desired: To add a shortcut:
a. Touch the shortcut of interest, then touch
b. Touch
From Templates to link to a specific template file or touch
From Folders to link to a folder.
c. Touch the desired template file or folder to configure the shortcut.
To delete a shortcut, touch the shortcut of interest, then touch
Shortcut, or touch Remove All to delete all shortcuts.
3. When you are finished configuring the shortcuts, touch
Menu.
You can use the QuantStudio
on the heated cover, lamp, and other instrument components.
1. From the Main Menu of the instrument touchscreen, touch Tools, then touch
Show Statistics.
2. When you are finished, touch
QuantStudio
6 and 7 Flex Real-Time PCR Systems v1.6 Maintenance and Administration Guide
™
Tap Obtain an IP address automatically.
1. Tap Use the following IP address.
2. Tap the IP Address field, enter the IP address using the
keypad, then tap Done.
3. Assign the:
• IP addresses for the DNS Servers (primary and
secondary)
• Subnet Mask setting
• Default Gateway setting
™
6 or 7 Flex System touchscreen to map the shortcut
.
™
6 or 7 Flex System touchscreen to view usage statistics
to return to the Main Menu.
Action
™
6 or 7 Flex System
Set Shortcut.
Remove
to return to the Main
Advertisement
Table of Contents
