Modify The Auditing Settings; Audit Report Generation; Viewing Audit Histories From The Security Settings Dialog Box - Applied Biosystems QuantStudio 6 Flex User Manual

Modify the
auditing settings

Audit report generation

Viewing audit
histories from the
security settings
dialog box
QuantStudio 6 and 7 Flex Real-Time PCR Systems v1.6 Maintenance and Administration Guide
™
To...
Select objects to
audit
You can create, modify and delete the reasons that are available
for selection in the Audit Reason dialog box (displayed when a user
performs an audited action).
Create audit reason
settings
You can use the QuantStudio
history from both the Security Settings dialog box and from open experiments,
templates, or studies.
• View audit histories from the Security Settings dialog box (see page 139)
• View audit histories from an experiment, a template, or a study (see page 142)
1. In the QuantStudio
2. In the Security Settings dialog box, select the Audit tab, then click View
Reports.
Note: To access the Audit Reports screen, the user role for an account must have
the Configure the security and audit feature permission. Users without the
permission can view object audit histories for individual entries in the libraries
by selecting entries, then clicking View Audit History.
Appendix E Security, audit, and electronic signature
1. In the Audit Settings group of the Audit tab, select the objects
to audit and the mode for each enabled item (Experiments,
Experiment Templates, or Study).
2. Set the Audit Mode for each item you enable for auditing:
• Optional – The event is audited, a reason prompt is
displayed, but the user can cancel and continue without
entering a reason.
• Required – The event is audited, a reason prompt is
displayed, and the user must specify a reason.
• Silent – The event is audited, no reason prompt is
displayed.
3. Click Apply Settings.
1. To require users to select a pre-defined reason in the Audit
Reason dialog box (displayed when a user performs an
audited action), enable Require users to select a reason to
change from the list. Users are not permitted to enter a
reason.
2. As needed, click Create, or select a reason from the list, then
click Edit or Delete.
™
Real-Time PCR Software to generate reports of audit
™ Real-Time PCR Software, select Tools4Security4Settings.

Audit report generation

Action
E
139