Twister ™ Robot Components - Applied Biosystems QuantStudio 6 Flex User Manual

Twister ™ Robot
components
QuantStudio 6 and 7 Flex Real-Time PCR Systems v1.6 Maintenance and Administration Guide
™
To scan a barcode using the hand-held barcode scanner:
1. Select the field in the instrument software where you want to enter the barcode.
2. Hold the hand-held barcode scanner 20–30 cm away from a plate or array card
and aim at the center of the barcode, then press the trigger. Slowly move the
scanning beam across the barcode until the scanner emits a high-pitched tone.
When the scanner scans a barcode, it automatically:
• Transmits the alphanumeric equivalent of the barcode to the instrument software.
The software enters the barcode text wherever the cursor is active.
• Transmits a carriage-return character (the equivalent of pressing the Enter key).
For more information on the hand-held barcode scanner, see the user documentation
shipped with the barcode scanner.
IMPORTANT! The Applied Biosystems
only by the QuantStudio
The QuantStudio ™ 7 Flex System supports the use of the Applied Biosystems
Twister ™ Robot, an optional accessory that consists of the components shown below.
Note: See the Applied Biosystems
(Pub. No. 4470693) for information on operating, calibrating, maintaining and
integrating the Twister ™
Front view
™ Twister
™ 7 Flex System.
™ Twister ™ Robot Automation Accessory User Guide
Robot.
Chapter 1 Getting started
Instrument hardware
™ Robot component is supported
1
™
19