Table of Contents
Advertisement
A
Overview of instrument touchscreen functions
82
Manual instrument operation
■
Overview of instrument touchscreen functions . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
■
Operate the instrument from the touchscreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
■
Maintain the instrument from the touchscreen . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
■
Administrate the instrument from the touchscreen . . . . . . . . . . . . . . . . . . . . . . . . 90
Note: This appendix describes how to operate the QuantStudio
Systems manually using the touchscreen interface. Although the QuantStudio
7 Flex Systems can be used without an Ethernet connection to a computer, the
touchscreen allows you to perform only a subset of the total instrument functions.
The QuantStudio
™
6 and 7 Flex Systems feature a touchscreen interface that you can
use to transfer data, manage instrument settings, and configure the instrument for
network use. The touchscreen does not provide access to all instrument functions.
Features such as analyzing experiments, instrument calibration, and remote
notification are available only through the QuantStudio
The following table summarizes the functions that are available from the touchscreen.
Category
[2]
Operational
[3]
Maintenance
[4]
Administration
QuantStudio
6 and 7 Flex Real-Time PCR Systems v1.6 Maintenance and Administration Guide
™
Function
Create experiments from templates
Run experiments
Transfer and delete experiments, templates, and
results to/from a USB drive
Back up and restore the instrument settings
Perform an instrument self test
Install and record a new lamp
Update the instrument firmware
Define the date and time
Define the instrument settings
Define the network settings
Define the maintenance reminders
™
6 and 7 Flex
™
™
Real-Time PCR Software.
Available
in secure
mode?
No
Yes
6 and
[1]
Advertisement
Table of Contents
