Operate The Instrument From The Touchscreen; Create An Experiment From A Template - Applied Biosystems QuantStudio 6 Flex User Manual

Operate the instrument from the touchscreen

Create an
experiment from a
template
QuantStudio 6 and 7 Flex Real-Time PCR Systems v1.6 Maintenance and Administration Guide
™
Category
[4]
Administration
[1]
See "Enable or disable instrument security" on page 95.
[2]
Tasks for users responsible for day-to-day use of the instrument.
[3]
Tasks for users who maintain the instrument.
[4]
Tasks for systems administrators or for information technology personnel.
The touchscreen provides limited control of the instrument to run experiments and
transfer data. You can perform the following functions from the touchscreen to
operate the instrument without using the QuantStudio
• Create an experiment from a template (see page 83)
• Run an experiment (see page 84)
• Transfer experiments, templates, and results data (see page 85)
Note: If the instrument is operating in secure mode, users can only open and close
the side door (see "Enable or disable instrument security" on page 95).
1. If necessary, download the experiment template to the QuantStudio
Real-Time PCR System (see "Transfer experiments from a USB drive" on
page 86).
2. If the instrument is in standby, tap the instrument touchscreen to activate it, then
tap .
3. In the main menu, tap
4. In the View Templates screen, tap a template, then tap + New.
To view the parameters of a template, select the desired template, then tap
View. When finished, tap
Note: You cannot modify the experiment parameters of a template.
Appendix A Manual instrument operation
Operate the instrument from the touchscreen
Function
Define the system shortcuts
Enable or disable instrument security
Review the instrument statistics
Review the instrument version information
View the system log
View Templates.
to return to the View Templates screen.
Available
in secure
mode?
™
Real-Time PCR Software:
™
6 or 7 Flex
A
[1]
Yes
83