Table of Contents
Advertisement
Syntax:
syncoutput [device <device list>] [, mode
<sync mode>]
syncoutput (<device list>,<sync mode>)
syncoutput()
Syntax Diagram:
Description:
Selects the vector output clock source. This command does
not affect the input section hardware. The actual clock
selection does not occur until the vectordrive command has
been executed. This command is used with the Vector
Output I/O Module only.
Arguments:
device list
sync mode
Example 1:
syncoutput device "/mod1", mode "intfreq"
clockfreq device "/mod1", freq "10MHz"
vectordrive device "/mod1"
syncoutput
I/O module name, clip module
name, or any combination of
these.
(Default = "/mod1")
Sync Modes: "pod", "drclk",
"int" or "intfreq".
(Default = "intfreq")
syncoutput-1
Advertisement
Table of Contents
