Table of Contents
Advertisement
9100A-017
Table 2-1. Vector Output I/0 Module Specifications (cont)
Stop Edge Setup Time (before clock edge,
for clock edge to not be recognized)............5 ns minimum
Enable Setup Time (before clock edge,
for clock edge to be recognized)..................0 ns minimum
Enable Hold Time (after clock edge,
for clock edge to be recognized)..................10 ns minimum
Data Timing for Asynchronous Measurements:
Maximum Frequency ........................................10 MHz
Minimum Pulse Width (HIGH or LOW) .............50 ns
Minimum Pulse Width (tri-state)........................150 ns
Data Compare Equal:
Minimum Pulse Width of Data and Enable .......75ns
PHYSICAL SPECIFICATIONS
Operating Temperature:
5 to 27°C, 95% RH maximum (non-condensing).
27 to 40°C, RH decreasing linearly form 95% to 50% (non-condensing).
Storage/Shipping Temperature:
20 to 60°C, 8% to 80% RH, (non-condensing).
2-4
Advertisement
Table of Contents
