Table of Contents
Advertisement
Syntax:
drivepoll device <device list>
drivepoll (<device list>)
drivepoll()
Syntax Diagram:
Description:
Returns the current drive and handshake status of the re-
quested I/O module(s). This command is used with the
Vector Output I/O Module only.
Arguments:
device list
Returns:
Vector drive status is indicated by bit 0. Bit 0 is 0 if vector
driving is not complete and is 1 if vector driving is
complete.
Handshake status is indicated by bit 1. Bit 1 is 0 if vector
driving is suspended and the selected edge of the signal on
the WAIT input has not yet been received. Bit 1 is 1 if the
module is not awaiting a WAIT input.
drivepoll
I/O module name, clip module
name, or combination of these.
(Default = "/mod1")
drivepoll-1
Advertisement
Table of Contents
