Fluke 9100A-017 Manual page 2

Vector output i/o module
Hide thumbs Also See for 9100A-017:
Table of Contents

Advertisement

LIMITED WARRANTY
John Fluke Mfg.Co., Inc. (Fluke) warrants your 9100A-017 Vector Output I/O
Module to be free from defects in material and workmanship under normal
use and service for one (1) year from the date of shipment. Software and
firmware products are provided "AS IS." We do not warrant that software or
firmware products will be error free, operated without interruption or that all
errors will be corrected. This warranty extends to you if you are the original
purchaser and does not apply to fuses, batteries, or any product which, in our
sole opinion, has been subject to misuse, alteration, or abnormal conditions
of operation or handling.
To obtain warranty service, contact a Fluke Service Center or send the
product, with the description of the difficulty, postage prepaid, to the nearest
Fluke Service Center. Fluke assumes no risk for damage in transit.
Fluke will, at our option, repair or replace the defective product free of charge.
However, if we determine that the failure was caused by misuse, alteration, or
abnormal condition of operation or handling, you will be billed for the repair.
The repaired product will be returned to you, transportation prepaid.
THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE OR USE. FLUKE WILL NOT BE LIABLE FOR
ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
OR LOSS WHETHER IN CONTRACT, TORT, OR OTHERWISE.

Advertisement

Table of Contents
loading

This manual is also suitable for:

9100a series

Table of Contents