Table of Contents
Advertisement
Syntax:
clockfreq
<freq>]
clockfreq (<device list>,<freq>)
clockfreq()
Syntax Diagram:
Description:
Sets the internal vector output drive clock frequency to 1
MHz, 5 MHz, 10 MHz, or 20 MHz. This command is used
with the Vector Output I/O Module only.
Arguments:
device list
freq
[device
<device
I/O module name, clip name,
or combination of these.
(Default = "/mod1")
freq of "1MHz", "5MHz",
"10MHz", or "20MHz".
(Default = "1MHz")
clockfreq
list>]
[, freq
clockfreq-1
Advertisement
Table of Contents
