Table of Contents
Advertisement
Syntax:
enableoutput
<mode>]
enableoutput (<device list>,<mode>)
enableoutput()
Syntax Diagram:
Description:
Specifies the level for the external ENABLE line used to
qualify the clocks for vector driving. Does not affect the
input section hardware. This command is used with the
Vector Output I/O Module only.
Arguments:
device list
mode
Example 1:
mod = "/mod1"
enableoutput device mod, mode "high"
enableoutput
[device <device list>] [, mode
I/O module name, clip module
name, or combination of
these.
(Default = "/mod1")
Enable modes: "always",
"high", or "low".
(Default = "always")
enableoutput-1
Advertisement
Table of Contents
