Table of Contents
Advertisement
If startmode is "at_arm":
the same conditions apply as above, except that the TL/1
arm command must be executed first (to permit
simultaneous arming of the vector driving and the
response gathering hardware).
Once loaded, a vector file can be driven repeatedly, starting
at any specified vector, until overwritten by a writepin or
writeword command.
Related Commands:
edgeoutput,
vectorload
For More Information:
• The "Overview Of TL/1" section of the Programmer's
Manual.
enableoutput,
syncoutput, strobeoutclock,
vectordrive-3
Advertisement
Table of Contents
