Syntax:
edgeoutput [device <device list>]
[,start<start edge>] [, stop <stop
edge>] [, clock <clock edge>]
edgeoutput (<device list>,<start edge>, <stop
edge>, <clock edge>)
edgeoutput()
Syntax Diagram:
Description:
Specifies the active edge for the external START, STOP, and
DR CLK inputs used to drive out vectors. Does not affect
the input section hardware. This command is used with the
Vector Output I/O Module only.
Arguments:
device list
start edge
stop edge
edgeoutput
I/O module name, clip name,
or combination of these.
(Default = "/mod1")
External start edge "+", "-", or
"at_vectordrive".
(Default = "+")
External stop edge "+" or "-".
(Default = "+")
edgeoutput-1