Siemens SINAMICS G120D Series Operating Instructions Manual page 294

Appendix
A.1 New and extended functions
Function
12 Line contactor control using a digital output of the inverter to
save energy when the motor is switched off
13 Fast flying restart for PM330 Power Modules:
The "Flying restart" function does not have to wait for the motor
demagnetization time, and identifies the motor speed without
requiring a search operation.
14 Load torque monitoring extended to include the following func-
tions:
Protection against blocking, leakage and dry running opera-
•
tion in pump applications
Protection against blocking and broken belts in fan applica-
•
tions
15 Automatic switchover of the real time clock from daylight saving
time (summer time) to standard time (winter time).
16 New or revised default settings of the interfaces: p0015 macros
110, 112 and 120
17 Expansion of the temperature sensors to include DIN-Ni1000
for analog inputs AI 2 and AI 3
18 Communication via AS-Interface.
Default setting of the communication via AS-i: p0015 macros
30, 31, 32 and 34
19 Communication expansion via Modbus:
Adjustable parity bit, access to parameters and analog inputs
20 Extending communication via BACnet:
Access to parameters and analog inputs
21 The bus error LED for communication via USS and Modbus can
be switched off
Operation with 1FK7 synchronous motors without encoder has already been released with firmware V4.7 for SINAMICS
1)
G120D with CU240D-2 Control Units.
In the preface you can find references to the description of the new functions: Changes in
this manual (Page 5).
294
SINAMICS
G120
✓ ✓ ✓ ✓
- - ✓ -
- ✓ ✓ ✓
- - ✓ -
- - ✓ -
- - ✓ -
✓ - - -
- - ✓ -
- - ✓ -
✓ ✓ ✓ ✓
Converter with control units CU240D-2
Operating Instructions, 04/2015, FW V4.7.3, A5E34262100B AB
G120D
✓ ✓ ✓ ✓ -
- - - - -
✓ - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
✓ ✓ - - -