7.7
Application-specific functions
7.7.1
Functions that match the application
The inverter offers a series of functions that you can use depending on your particular
application:
● Unit changeover (Page 176)
● Braking functions
– Electrically braking the motor (Page 180)
– Motor holding brake (Page 184)
● Automatic restart
Details can be found in the List Manual from parameter p1210, see also: Manuals for
your converter (Page 316).
● Flying restart (ON command with rotating motor)
Details can be found in the List Manual from parameter p1200, see also: Manuals for
your converter (Page 316).
● PID technology controller (Page 188)
● Monitoring functions, e.g. System protection (Page 193)
● Free function blocks (Page 200)
Converter with control units CU240D-2
Operating Instructions, 04/2015, FW V4.7.3, A5E34262100B AB
Advanced commissioning
7.7 Application-specific functions
175