Special Program Mode - Henny Penny OFG-341 Operator's Manual

4-2. PRODUCT PROGRAM
MODE (Continued)
4-3. SPECIAL PROGRAM
MODE
Feb. 2007
Filter Cycle Mode (Optional)
For "2,MIXED", or "3,GLOBAL" to appear in the Product
Program Mode, the Filter Tracking must be enabled in the Special
Program Mode.(See Special Program Mode Section)
13. Press .
"2,MIXED"
a. "FILTER AFTER" shows in the display, along with
the preset number of Cook Cycles.
b. Press and release
of Cook Cycles between filters shows in the display.
For example, if 4 is set for a product, each time that
product is selected, it counts 1/4, or 25%. Then each
time a product is cooked, the percentages add up until
100%, or more is reached. Then the display shows
"FILTER SUGGESTED".
"3,GLOBAL"
a. "FILTER INCL" shows in the display, along with
"NO" or "YES"
b. Press and release
is to be included in the filter count, or "NO" if it is
not.
The Special Program Mode is used to set more detailed
parameters listed below.
SP-1 • Degrees Fahrenheit or Celsius
SP-2 • Language: Eng, French, German, Spanish, Portuguese
SP-3
• System initialization (factory presets)
SP-4
• Audio volume
SP-5 • Audio tone
SP-6 • Αudio effect
SP-7 • Type of shortening to be melted - liquid, solid
SP-8
• Idle Mode
SP-9
• Filter tracking
SP-10 • Product buttons
SP-11 • Cooking display
SP-12 • Quality timer display
SP-13 • Baskets - 1 or 2
SP-14
• Auto-lift detection
SP-15
• Μulti-stage cooking
SP-16 • Program code change
SP-17 • Energy Save Enabled? (Gas Fryers)
SP-18 • Clean-out minutes
SP-19
• Clean-out temperature
4-4
Model OFE/OFG/OEA/OGA-341, 342 Model OFE/OFG/OEA/OGA-341, 342
until the desired number
to "YES" if that product