Henny Penny OFG-341 Operator's Manual page 27

3-7. BASIC OPERATIONS
AND PROCEDURES-
(12 Button Controls/
Autolift) (Continued)
Sept. 2003
To load product directly into the shortening on Auto-
lift fryers, lower empty basket(s) into the shortening by
pressing
the product button to start the Cook Cycle.
Raise the basket(s) on Auto-lift fryers anytime during
a Cook Cycle by pressing
Cycle then pauses.
10. At the end of the Cook Cycle, a tone sounds and
the display shows "DONE". Lift the basket from
the shortening. (On auto-lift fryers, the basket(s)
automatically rises out of the shortening.) To stop the
"DONE" beeper, press either
A different product can be selected during the first
minute of cooking, in case the wrong product button was
pressed.
11. The display shows either dashes, or the product name,
depending on the Special Program setting, SP-10. If a
Quality Time was programmed, the controller alternately
shows the product selected and the Quality Time
remaining in minutes. If a different product is selected
during the Hold Cycle, the display only shows the
product selected.
12. At the end of the Hold Cycle, a tone sounds, the display
flashes "QUALITY", and the product it was timing.
Press and release
In the Cook Mode, when "FILTER SUGGESTED,
shows in the display, the operator has the option to filter
at this time, or to continue cooking. But, if the operator
continues cooking, a filter lockout will occur within the
next Cook Cycle, or two.
When "FILTER LOCKOUT" , then "YOU *MUST* FILTER
NOW........" shows in the display,
until the unit is filtered.
3-12
Model OFE/OFG/OEA/OGA-341, 342 Model OFE/OFG/OEA/OGA-341, 342
, load with product, then press
. The Timed
, or the product button.
.
is the only button that functions,