Henny Penny OFG-341 Operator's Manual page 18

3-2. OPERATING
CONTROLS 12
BUTTON CONTROLS
Fig. Item
No. No.
3-2 1
3-2 2 Digital Display
3-2 3
3-2 4
3-2 5
3-2 6 & 7
Sept. 2003
This section provides operating procedures for the Henny Penny
340 series open fryer with 12 button timer controls. Read sections
1, 2, and 3, and all instructions before operating the fryer.
Figure 3-2 shows the function of the 12 button timer control.
Description
This LED lights when the control calls for heat, and the
burners come on and heat the shortening
Digital Display Shows the shortening temperature, the
timer countdown in the Cook Cycle, and the selections in
the Program Mode; press the INFO button to display the
temperature of the shortening; if the temperature exceeds
425°F (218°C), the display reads "E-5", "FRYER TOO
HOT"
Once the fryer is out of the Melt Mode, this LED lights,
signaling the operator that the shortening temperature is not
at the proper temperature for cooking product
This LED lights when the shortening temperature is within
5° of the setpoint temperature, signaling the operator that
the shortening temperature is at the proper temperature for
cooking product
Used to display the current shortening temperature, the
setpoint temperature, as well as cooking performance, and
other information such as, filter use, time of day, etc; in the
Program Mode, it steps back to the previous parameter
Used to adjust the value of the currently displayed setting in
the Program Mode
Model OFE/OFG/OEA/OGA-341, 342 Model OFE/OFG/OEA/OGA-341, 342
Function
3-3