Henny Penny OFG-341 Operator's Manual page 19

3-2. OPERATING
CONTROLS 12
BUTTON CONTROLS
(Continued)
Fig. Item
No. No.
3-2 8
3-2 9
3-2 10
3-2 11
3-2 12
Sept. 2003
Description
Menu Card Window
Product Select Buttons
Model OFE/OFG/OEA/OGA-341, 342 Model OFE/OFG/OEA/OGA-341, 342
Function
Used to access the Program Modes; once in the
Program Mode, it is used to advance to the next
parameter
Used to stop Cook Cycles and also to stop the quality
timer at the end of a Hold Mode; to use them to start
Cook 0 Cycles, see Special Program Mode Section
item SP-10
Menu Card Displays the food product associated
with each product Window selection button; the
menu card strip is located behind the decal
Product Select Used to stop Cook Cycles and also to
stop the quality Buttons timer at the end of a Mold
Mode; to use them to start Cook Cycles, see Special
Program Mode Section item SP-10
Are used to manually raise or lower the basket (or
baskets), out of the shortening if unit is equipped
with auto-lift; if pressed during a Cook Cycle, the
cooking time is paused until the basket (or baskets)
are lowered back into the shortening; on units not
equipped with auto-lift, these buttons manually pause
and resume a cook timer
3-4