Henny Penny OFG-341 Operator's Manual page 45

4-3. SPECIAL PROGRAM
MODE (Continued)
Sept. 2003
Idle Mode (SP-8)
A programmed Idle Mode allows the shortening temperature to
drop to a lower temperature when not in use. This saves on the
shortening and utilities.
a. Follow steps 1and 2 above.
b. Press and release
MODE ENABLED?" flashes in the display, along with
"NO" or "YES".
c. Press and release
YES.
d. With "YES" in the display, the Idle Mode is enabled.
Press and release
TEMP" shows in the display, along with the preset
temperature.
e. The idle setpoint temperature, can be changed by
pressing
f. Press and release
MINUTES" shows in the display, along with the preset
time.
g Press
before the auto-idle is enabled; 60 the maximum, OFF
the minimum. Ex: "30" in the display means, if product
in not cooked in that frypot for 30 minutes, the control
automatically activates the idle setpoint temperature,
programmed above.
4-8
Model OFE/OFG/OEA/OGA-341, 342 Model OFE/OFG/OEA/OGA-341, 342
7 times. "SP-8" and "IDLE
to toggle between NO and
. "SP-8A" and "IDLE SETPT
.
. "SP-8B" and "AUTO-IDLE
to set the minutes the cooker stays idle