Henny Penny OFG-341 Operator's Manual page 49

4-3. SPECIAL PROGRAM
MODE (Continued)
Sept. 2003
d. Press
sets the display to constantly show the Quality Time
remaining, and the product ID that the Quality Time is
holding after a Cook Cycle.
e. The third option, "3,NM+QT", sets the display to
alternate between the name of the product just cooked
and the Quality Time remaining.
Number of Baskets (SP-13)
This allows the operator to set the controls for use of 1 basket or 2.
a. Follows steps 1 and 2 above.
b. Press until "SP-13" and "NUMBER OF
BASKETS" shows in the display.
c. Press
The number of baskets can also be changed without
entering the Program Mode. Press and hold
turning on the power switch for a single basket. To
change back to two baskets, press and hold
turning on the power switch.
Auto-lift Detection (SP-14)
a. Follows steps 1 and 2 above.
b. Press until "SP-14" and "AUTOLIFT" shows in
the display.
c. Keep the controls set at "1,DETECT" for the controls to
automatically detect the autolift or not.
d. Press
lift. This can be used to bypass the auto-lift mechanism,
if the auto-lift becomes disabled.
e. Press
feature, if the controls are not detecting the auto-lift.
4-12
Model OFE/OFG/OEA/OGA-341, 342 Model OFE/OFG/OEA/OGA-341, 342
to show the second option. "2,QT+ID",
to toggle between "1,BSKT", or "2,BSKT".
to select "2,*OFF*", to disable the auto-
to select "3,*ON*", to force the auto-lift
while
while