Henny Penny OFG-341 Operator's Manual page 42

4-3. SPECIAL PROGRAM
MODE (Continued)
Sept. 2003
1. Press and hold
"L-2" and "LEVEL 2", followed by, "SP PROG" and
"ENTER CODE shows in the display.
2. Enter code 1, 2, 3, and "SP- 1 ", "TEMP, UNITS" shows
in the display.
If a bad code is entered, a tone sounds and "BAD
CODE" shows on the display. Wait a few seconds, the
control reverts back to the Cook Mode, and repeat the
above steps.
To exit from the Special Program Mode at any time, press and
hold button for 2 seconds, or to roll back to previous
setting, press .
Degrees Fahrenheit or Celsius (SP-1)
a. Follow steps 1 and 2 above.
b The display flashes "SP- 1" and "TEMP, UNITS", along
with "ºF" or "ºC". Press
between "ºF" and "ºC.
Language (SP-2)
a Follow steps 1 and 2 above.
b. Press and release
"LANGUAGE" flashes on the display, along with the
language (Ex:" 1.ENGL")
c. To toggle to the desired language, press and
release
4-5
Model OFE/OFG/OEA/OGA-341, 342 Model OFE/OFG/OEA/OGA-341, 342
for 5 seconds until
buttons to toggle
button. "SP-2" and
.