Henny Penny OFG-341 Operator's Manual page 43

4-3. SPECIAL PROGRAM
MODE (Continued)
Feb. 2002
System Initialization (SP-3)
This step resets the cook programs to factory settings.
a. Follow steps 1and 2 above.
b. Press and release
INIT" flashes on the display, along with "INIT'.
c. Press and hold
a tone sounds, and "IN 3", "IN 2", " IN 1" flashes on the
right side of the display. When "INIT" starts flashing on
the left side of the display, release
" DONE" shows on the display, the initialization is
complete, and the controls now have factory preset
parameters.
All cook settings programmed by the operator are lost
when System Initialization is completed
Audio Volume (SP-4)
The volume of the speaker can be adjusted.
a. Follow steps 1 and 2 above.
b Press the
VOLUME" flashes on the display, along with the volume
value.
c. Press
maximum value and 1 the minimum.
Audio Tone (SP-5)
The tone of the speaker can be adjusted.
a. Follow steps 1 and 2 above.
b Press 4 times. "SP-5" and "AUDIO TONE (HZ)"
flashes on the display, along with the tone value.
c Press
the maximum, 50 the minimum.
4-6
Model OFE/OFG/OEA/OGA-341, 342 Model OFE/OFG/OEA/OGA-341, 342
twice. "SP-3" and "DO SYSTEM
. "INIT" shows on the display,
. When
3 times. "SP-4" and "AUDIO
to adjust the speaker volume; 10 the
to adjust the tone of the speaker; 2000