Step 4B - Usb Device Discovery - Datalogic Matrix 120 Product Reference Manual

Step 4B - USB Device Discovery

USB device discovery on a PC using Windows XP SP3 requires particular attention.
See " Windows XP SP3 and Matrix 120 USB Interface" on page 150 for more infor-
mation.
NOTE
The following configuration procedure assumes that a laptop computer running
DL.CODE is connected to a Matrix 120 factory default reader through the USB
port (CAB-1021). See Step 1 - Connect the System.
1. After the reader is connected to the USB port and boots up successfully,
from DL.CODE, click the Getting Started button to discover it. The unit will
be shown in the network Online Devices list. Matrix 120 devices connected
through the USB interface will not be shown in the Serial Devices list.
2. Find your device in the list by matching its serial number (SN). The USB
driver creates a virtual Ethernet connection with an IP address that cannot
be modified. In fact, it is easy to see the unit in the list because it is the one
without a wrench icon (used for modifying the IP parameters).
Product Reference Guide
Step 4 - Installing DL.CODE Configuration Program
13