Direct Part Marking Applications - Datalogic Matrix 120 Product Reference Manual

Software Configuration

Direct Part Marking Applications

For Data Matrix family codes the
when Processing Mode is set to Standard and selects the decoding algorithm
according to the printing/marking technique used to create the symbol and on
the overall printing/marking quality.
The possible selections progress from Low to Very High where Low can improve
decoding time for good print/mark quality and/or relatively normal size codes.
This is the default setting. Very High can improve the decode rate for low print/
mark quality and/or small size codes. This algorithm is much more aggressive
but in general it may have longer decoding times than the lower complexity
algorithms. To minimize decoding time it is better to select the lowest value that
still guarantees good decoding.
Matrix 120is indicated for DPM applications where the parts are marked by Laser
Etching.
Various Imzge Filters are available to enhance Direct Part Marking applications.
For more details see the DL.CODE User's Manual.
136
Decoding Complexity
parameter is available
Matrix 120