X-Press Human Machine Interface - Datalogic Matrix 120 Product Reference Manual

Introduction
In X-PRESS Configuration mode the colors and meaning of these five LEDs are
described in .
The keypad button
starts the X-PRESS interface for quick installation without using a PC (see Step 3
- X-PRESS Configuration).

X-PRESS Human Machine Interface

X-PRESS is the intuitive Human Machine Interface designed to improve ease of
installation and maintenance.
Status information is clearly presented by means of the five colored LEDs,
whereas the single push button gives immediate access to the following relevant
functions:
34
(Figure 15
Test Mode with bar graph visualization to check
static reading performance.
Focus (Aim) turns on the laser indicator to aim the
reader at the target. The target should be placed a
few mm to the left and centered vertically with
respect to the aiming pattern (cross).
Setup to self-optimize and auto-configure pho-
tometry parameters.
Learn to self-detect and auto-configure for read-
ing an unknown barcode (by type and length). Only
one symbology type can be saved using this
method. Performing Autolearn on a second sym-
bology will overwrite the first one.
-, 8), is software programmable. By default it
Matrix 120