Sealing The Envelopes Only - Pitney Bowes DM230L Operator's Manual

3 • Running Mail
Sealing the
4
Envelopes
Only
3-18
You can set up your mailing system to seal envelopes without printing
postage on them.
To select this mode on the DM230L/DM330L/DM350L:
1. Press the Normal Preset button on the IntelliLink
2. Press the number for Seal Only. The seal-only ready screen appears.
3. Follow the instructions in the Printing Postage on an Envelope section
in this chapter to feed the envelopes.
To select this mode on the DM350L:
1. Press the Options key on the IntelliLink
2. Press the number for Seal Only. The seal-only ready screen appears.
3. On the autofeeder control panel, set the Seal/No Seal lever to the seal
position. To seal the envelopes, move the lever all the way to the left.
4. Follow the instructions in the Printing Postage on an Envelope section
in this chapter to feed the envelopes.
Control Centre.
TM
Control Centre.
TM
SV61891 Rev. A