ProMinent DULCO flex Control Operating Instructions Manual page 44

Initial commissioning
44
10. Press the Clickwheel
ð The rotor turns slowly and the following appears:
' Please wait!' .
The rotor stops and
this.
11. Press the Clickwheel.
ð The rotor turns and the following appears:
'Please wait...' .
The rotor stops - this time standing on its tip - and
again!' appears. Please ignore this.
12. Press the Clickwheel.
'Run in tube?' appears.
ð
'Yes' / 'No'
'No' exits this macro.
13. Selecting
The pump draws in the pump hose (4) if
'Run in tube...' appears.
ð
The rotor turns slowly a couple of times.
'Tube change interval' menu appears.
14. The
'Revolutions' menu item, you have the option of
In the first
extending or shortening the warning time for the next hose replace‐
ment. You can do this by changing the
'Service è Hose' .
15. To reset the warning time, press the
'Reset interval now!' appears.
ð
16. To complete the hose replacement, press the
'Complete!' and a hand symbol appear. This is a reminder that
ð
the pump still needs to be stopped manually. If necessary, now
restart the pump using the
'Insert rotor again!' appears. Please ignore
'Yes' is selected.
'Revolutions' - also refer to
[Clickwheel] .
[Clickwheel] again.
[STOP/START] key.
'Install Cover