ProMinent DULCO flex Control Operating Instructions Manual page 40

Basic set-up principles
Confirming an entry
Exiting a menu option without confirming it
Returning to a continuous display
Changing adjustable variables
a)
5432
5432
Fig. 28: a) Changing from one figure to its initial figures; b) Changing the figure; c) Returning from the last figure to the
(complete) figure (to correct a wrong figure, for example).
40
[Clickwheel] .
Briefly press the
ð The software switches to the next menu point or back to the
menu and saves the entry.
[Back] .
Press
ð The software switches to the next menu point or back to the
menu without saving anything.
[Menu] .
Press
ð The software cancels the entry and switches to a continuous
display without saving anything.
b)
5
432
Changing a (complete) number
[Clickwheel] .
Turn the
ð The value of the figure highlighted is raised or lowered.
Changing figures
1.
To adjust the value of a figure digit-by-digit, press
ð The first figure is highlighted - see Figure above, point a)
2. To adjust the value of a figure, turn the
3. To move to the next figure, press
point b).
4. To run through the figures again, if necessary (possibly because of
an incorrect figure), when you get to the last figure press
[Priming] again - see above Figure, point c).
ð Now you can start from the beginning again.
c)
543
2
5432
[Priming] .
[Clickwheel] .
[Priming] - see above Figure,
B0777