Clear All; Examples - ProMinent DULCO flex Control Operating Instructions Manual

'Menu'
Set up /
12.4.2.5 Delete individual program lines (
12.4.3

Clear all

12.4.4

Examples

68
'Delete' )
'Menu / Information è Timer è Set timer è Delete'
[Clickwheel] to select the required program line / instruction
1. Use the
according to its number.
2. The program line will be deleted as soon as you press the
[Clickwheel] .
ð The timer software re-sorts the remaining programme lines
(Rules - see Ä 'Sorting sequence' on page 67 ).
Delete all program lines
The option to delete all program lines is to be found one
level higher in the menu:
'Menu / Information è Timer è Clear all'
'Menu / Information è Timer è Clear all è ...'
'Clear all' menu to clear all instructions (the entire program).
Use the
Requirements:
You have already worked with the pump type
n
The time has been set (possible set under
n
Time' Only possible with 'Timer status' - 'Inactive' ).
è
'Settings è Set time