Declaration Of Conformity For Machinery - ProMinent DULCO flex Control Operating Instructions Manual

20

Declaration of Conformity for Machinery

Tab. 24: Excerpt from the Declaration of Conformity
Designation of the Peristaltic metering pump DULCO flex Control
product:
Product type: DFXa...
Serial number: see nameplate on the device
Relevant directives: Machinery Directive (2006/42/EC)
Compliance with the protection targets of the Low Voltage Directive according to Annex I, No.
1.5.1
of the Machinery Directive (2006/42/EC)
EMC Directive (2014/30/EU)
RoHS Directive (2011/65/EU)
Harmonised stand‐ EN ISO 12100: 2010
ards applied, in par‐
EN 809:1998 + A1:2009 + AC:2010
ticular:
EN 61010-1:2010
EN 61000-6-2:2005 + AC:2005
EN 61000-6-4:2007 + A1:2011
EN 50581:2012
Date: 01.08.2019
Declaration of Conformity for Machinery
In accordance with DIRECTIVE 2006/42/EC OF THE EUROPEAN PAR‐
LIAMENT AND OF THE COUNCIL, Appendix I, BASIC HEALTH AND
SAFETY REQUIREMENTS, section 1.7.4.2. C.
We,
ProMinent GmbH
n
Im Schuhmachergewann 5 - 11
n
D - 69123 Heidelberg, Germany,
n
hereby declare that the product specified below complies with the relevant
basic health and safety requirements of the EC Directive on the basis of its
functional concept and design and in the version marketed by us.
Any modification to the product not approved by us invalidates this decla‐
ration.
You can download the Declaration of Conformity at www.prominent.com.
103