Declaration Of Conformity For Machinery - ProMinent Makro TZ Operating Instructions Manual

19

Declaration of Conformity for Machinery

For pumps without explosion protec‐
tion:
Tab. 20: Excerpt from the Declaration of Conformity
Designation of the product:
Product type:
Serial number:
Relevant directives:
Harmonised standards applied,
in particular:
Date:
In accordance with DIRECTIVE 2006/42/EC OF THE EUROPEAN
PARLIAMENT AND OF THE COUNCIL, Appendix I, BASIC
HEALTH AND SAFETY REQUIREMENTS, section 1.7.4.2. C.
We,
ProMinent GmbH
n
Im Schuhmachergewann 5 - 11
n
D - 69123 Heidelberg, Germany,
n
hereby declare that the product specified below complies with the
relevant basic health and safety requirements of the EC Directive
on the basis of its functional concept and design and in the version
marketed by us.
Any modification to the product not approved by us invalidates this
declaration.
Metering pump, product range Makro TZ
TZMb _ _ _ _ _ _ _ _ _ _ _ _ _ _ § 0 _ _ _
TZHa _ _ _ _ _ _ _ _ _ _ _ _ _ _ § 0 _ _ _
TZKa _ _ _ _ _ _ _ _ _ _ _ _ _ _ § 0 _ _ _
with the characteristics
§ = "R" or "S" or "V" or "Z" or "N"
see nameplate on the device
Machinery Directive (2006/42/EC)
The protection targets of the Low Voltage Directive 2014/35/EU were
complied with in accordance with Appendix I, No. 1.5.1 of the
Machinery Directive 2006/42/EC
EMC Directive (2014/30/EU)
RoHS Directive (2011/65/EU)
EN ISO 12100:2010
EN 809:1998 + A1:2009 + AC:2010
EN 61000-6-2:2005 + AC:2005
EN 61000-6-4:2007 + AC:2011
EN 50581:2012
22.07.2019
You can download the Declaration of Conformity at www.promi‐
nent.com.
Declaration of Conformity for Machinery
93